Heat Conduction Silicon Carbide Crucible Thermal Expandable Graphite Crucible for Gold Melting

• Customization: Available
• Feature: Chemical Corrosion Resistance, Corrosion Resistance, Good Abrasion Resistance, Good Insulation Performance, High Mechanical Strength, Thermal Shock Resistance, Long Time Materials
• Refractoriness (℃): 1770< Refractoriness< 2000
• Model NO.: jucos
• Shape: Block
• Material: Graphite
• Bbending Strengthing Strength: 15-40MPa
• Composition: High Pure
• Transport Package: Pallet
• Specification: graphite, alumina ceramic
• Trademark: jucos
• Origin: Zibo
• HS Code: 6902
• Production Capacity: 50000PCS/Year

Product Description

Product Description

 

high strength graphite crucible for furnace

Specialty carbon graphite materials include medium grain graphite, fine grain graphite, and ultra-fine grain graphite.
Specialty carbon products (Carbon specialties) will realize the carbon's extensive potential. They are high-performance products that underline the development of key industries such as electronics, machinery, and metallurgy. They are also used in cutting-edge fields of science such as semiconductors aviation and the aerospace industry.

Features of specialties graphite:
* High temperature resistance, and the melting point is 3850±50°C, the boiling point is 4250.
* Low ash content, high purity, avoiding pollution to your products.
* Graphite material is easily to machine into any shapes you like.
* High mechanical strength
* Good sliding properties
* High thermal conductivity
* High thermal shock and chemical resistance
* Food safety
* Low wettability
* High corrosion resistance and oxidation resistance
* Good electrical conductivity
* High density and high mechanical strength
* Proper electrical conductivity



Main properties of graphite specialties
 

Model	Density	Compression Strength	Flexural Strength	Resistance	Ash	Grain Size
	g/cm3	Mpa	Mpa	μΩm	%
	>=	>=	>=	<=	<=
JUC72	1.62	28	14	8	0.3	1,2,4mm
JUC72	1.72	36	18	7.5	0.3	2,0.8mm
JUC75	1.75	48	24	7.5	0.3	325mesh
JUC80	1.80	52	28	7.5	0.2	325mesh
JUC85	1.85	62	36	7	0.2	325mesh

Notes of operating graphite crucibles:

1. The crucible should be stocked in the dry situation
2. Carry the crucible lightly
3. Warm the crucible in the drying machine or near the
furnace. The warming temperature should be up to 500ºC.
4. The crucible should be put under the furnace month flat.
5.When put the metal into the crucible, you should take the crucible capacity as your reference. If the crucible is too full, it will be damaged by expansion.
6.The clamps shape need as that of crucible. Avoid the concentrate stressed destroy of the crucible.7. Clean the crucible regularly and lightly.
8. The crucible should be put in the center of the furnace and leave some distance between the crucible and furnace.
9. Turn the crucible once in one week and this will help lengthen the service life.
10. The flame should not touch the crucible directly.
11.24 hours constant use will make crucibles have longer service life.
The smelt soup in the crucible should be cleared out when the furnace stop working, in order to avoid molten soup
solidificating and will be expanded when fire to reheat, and affect the service life of crucible or even burst.
12. We suggest that about 2 months for crucible melting aluminum alloy (every week for melting copper alloy), hanging out to check whether there is something wrong in the surface, and clean furnace hearth as well as turn the crucible, this operation ishelpful to prolong the service life of crucible.
 

FAQ

Q1 : How can you control your quality?

A1 : For each production processing, JUCOS have complete QC system for the chemical composition and Physical properties. After production, all the goods will be tested, and the quality certificate will be shipped along with goods. 

Q2 : What is your lead time? 

A2 : It usually needs about 15- 20 days after receiving the PO. 

Q3 : Do you provide free samples?

A3 : Yes, free samples are available, generlly speaking, the buyer shall bear all the delivery cost. 

Q4 : What is your payments terms?

A4 : We can accept 30% deposit, 70% balance to be against the BL copy or by LC, or other payment terms. 

Q5 : Can we visit your company?

A5 : Yes, for sure, you are welcome to visit JUCOS company. 

Q6 : What standards do you have?

A6 : Our products meet the standards, such as ASTM, ASME, AMS, DIN, JIS etc. 

      The third party testing is all available for us.
 

Why Choose Us

Please Give us one minute, just one minute, you can eliminate your doubts and witness that we maintain an attitude of high seriousness and professional to solve your problems. 

No.1: JUCOS are Manufacturer of refractory materials, so we can provide you Professional Solutions about your problems. Although our salesman cannot reply you immediately, pls leave your email or phone number, we can let our technician directly help you ASAP. 

No. 2: Our Reputation built through: Germany, UK, Russia, South Africa, Iran, Japan, Korea and India etc. in the past years. You can always get Feedback from our customers in these countries if you like before dealing with us. 

No. 3: We have good Connection with Shipping Company, Agency, as well as the local custom and port authority. Making sure we Deliver on time. 

No. 4: We have no gap in Communication, because JUCOS will help you in our Sincere Attitude. 

No. 5: We can provide you the best price, and what you will get from us is our best effort in service and the hospitality that you are willing to become our Friend.

Certifications