Hot Sale Sic Foundry Silicon Carbide Graphite Crucible for Iron Metal Melting

• Customization: Available
• Feature: Chemical Corrosion Resistance, Corrosion Resistance, Good Abrasion Resistance, Good Insulation Performance, High Mechanical Strength, Thermal Shock Resistance, Long Time Materials
• Shape: Block
• Model NO.: JUCOS
• Refractoriness: 1770< Refractoriness< 2000
• Type: Refractory Material
• Material: Graphite
• Bbending Strengthing Strength: 15-40MPa
• Composition: High Pure
• Transport Package: Pallet
• Specification: graphite, alumina ceramic
• Trademark: jucos
• Origin: Zibo
• HS Code: 6902
• Production Capacity: 50000PCS/Year

Product Description

Product Description

High Strength Graphite Crucible for Furnace

Specialty carbon graphite materials include medium grain graphite, fine grain graphite, and ultra-fine grain graphite.
Specialty carbon products (Carbon specialties) will realize the carbon's extensive potential. They are high-performance products that underline the development of key industries such as electronics, machinery, and metallurgy. They are also used in cutting-edge fields of science such as semiconductors aviation and the aerospace industry.
 

Features of Graphite Crucible
* High temperature resistance, and the melting point is 3850±50°C, the boiling point is 4250.
* Low ash content, high purity, avoiding pollution to your products.
* Graphite material is easily to machine into any shapes you like.
* High mechanical strength
* Good sliding properties
* High thermal conductivity
* High thermal shock and chemical resistance
* Food safety
* Low wettability
* High corrosion resistance and oxidation resistance
* Good electrical conductivity
* High density and high mechanical strength
* Proper electrical conductivity

Model	Density	Compression Strength	Flexural Strength	Resistance	Ash	Grain Size
	g/cm3	Mpa	Mpa	μΩm	%
	>=	>=	>=	<=	<=
JUC72	1.62	28	14	8	0.3	1,2,4mm
JUC72	1.72	36	18	7.5	0.3	2,0.8mm
JUC75	1.75	48	24	7.5	0.3	325mesh
JUC80	1.80	52	28	7.5	0.2	325mesh
JUC85	1.85	62	36	7	0.2	325mesh

Notes of Operating Graphite Crucibles

1. The crucible should be stocked in the dry situation
2. Carry the crucible lightly
3. Warm the crucible in the drying machine or near the
furnace. The warming temperature should be up to 500ºC.
4. The crucible should be put under the furnace month flat.
5.When put the metal into the crucible, you should take the crucible capacity as your reference. If the crucible is too full, it will be damaged by expansion.
6.The clamps shape need as that of crucible. Avoid the concentrate stressed destroy of the crucible.7. Clean the crucible regularly and lightly.
8. The crucible should be put in the center of the furnace and leave some distance between the crucible and furnace.
9. Turn the crucible once in one week and this will help lengthen the service life.
10. The flame should not touch the crucible directly.
11.24 hours constant use will make crucibles have longer service life.
The smelt soup in the crucible should be cleared out when the furnace stop working, in order to avoid molten soup
solidificating and will be expanded when fire to reheat, and affect the service life of crucible or even burst.
12. We suggest that about 2 months for crucible melting aluminum alloy (every week for melting copper alloy), hanging out to check whether there is something wrong in the surface, and clean furnace hearth as well as turn the crucible, this operation ishelpful to prolong the service life of crucible.
 

Q1 : How can you control your quality?
A1 : For each production processing, JUCOS have complete QC system for the chemical

       composition and Physical properties. After production, all the goods will be tested, and
       the quality certificate will be shipped along with goods.

Q2: Are you a manufacture or trader?
A2: We are truly a manufacturer, we not only can provide the high quality products with the
       best price, but also can offer the best pre-sale service and after-service.

Q3 : Do you provide free samples?
A3 : Of course, free samples are available.

Q4 : What is your lead time? 
A4 : It usually needs about 15- 20 days after receiving the PO.

Q5 : Can we visit your company?
A5 : Yes, for sure, you are welcome to visit JUCOS company and our products.
       Also, we can talk more about the technique details if you need.

Q6 : What is the warranty of your products?
A6 : Our products have at least 1 year warranty,if any quality problems,
    we will take responsibility of the cost of the shipment and the replacement.

Q7: What's the MOQ of trial order?
A7 : No limit, we can offer the best suggestions and solutions according to your condition.

Q8: Why choose us?
A8: We had been in this line for more than 25 years, we can not only provide you high
      quality products with competitive price, but also we can supply good technique service
      which can help you solve problems.

Q9 : What standards do you have?
A9 : Our products meet the standards, such as ASTM, ASME, AMS, DIN, JIS etc. 
       The third party testing is all available for us.